We’re exhibiting: WIRE, DUSSELDORF, GERMANY. 20-24 June. – Hall 11/Stand No.E26
Datasheet: Nickel® 200
Nickel® 200 is commercially pure and has good mechanical properties and excellent corrosion resistance to alkalis i.e. Sodium hydroxide. It also has good electrical, thermal and magneto-strictive properties.
Nickel® 200 is also known as Phyweld 200.
Available in all profile options
Commercially pure nickel.
Resistant to various reducing chemicals & caustic alkalines.
Good magnetostrictive properties.
High electrical and thermal conductivity.
Good ductility and low work hardening rate.
Good weldability and solderability.
Electronic components
Electrical components
Lead in wires for heating elements
Battery connections/terminals
Chemical processing
Aerospace components
Food processing
Synthetic fibre processing
W.NR 2.4060
W.NR 2.4066
UNS N02200
AWS 070
ASTM B160
ASTM B162
BS 3075 NA11
BS 3076 NA11
Element | Min % | Max % |
---|---|---|
Ni | 99.0 | – |
Cu | – | 0.25 |
Fe | – | 0.40 |
C | – | 0.15 |
Si | – | 0.35 |
Mn | – | 0.35 |
Mg | – | 0.20 |
Ti | – | 0.10 |
S | – | 0.01 |
Co | – | 2.00 |
Density | Melting Point | Coefficient of Expansion | Modulus of Rigidity | Modulus of Elasticity |
---|---|---|---|---|
8.89 g/cm³ | 1446 °C | 13.3 μm/m °C (20 – 100 °C) | 81 kN/mm² | 204 kN/mm² |
0.321 lb/in³ | 2635 °F | 7.4 x 10-6 in/in °F (70 – 212 °F) | 11748 ksi | 29588 ksi |
Electrical Resistivity | |
---|---|
9.6 μΩ • cm | 58 ohm • circ mil/ft |
Thermal Conductivity | |
---|---|
70.2 W/m • °C | 487 btu • in/ft2 • h • °F |
Condition | Approx. tensile strength | Approx. operating temperature |
---|---|---|
Annealed | <500 N/mm² (<73 ksi) | Tensile strength and elongation drop significantly at temperatures above 315 °C (600 °F). Service temperature is dependent on environment, load and size range. |
Hard Drawn | 700 – 900 N/mm² (102 – 131 ksi) | Tensile strength and elongation drop significantly at temperatures above 315 °C (600 °F). Service temperature is dependent on environment, load and size range. |
The above tensile strength ranges are typical. If you require different please ask.
*Trade name of Special Metals Group of CompaniesConductive