Nitronic 60 is an anti-galling and wear resistant stainless steel.
Applications include:
- Valve Stems
- Pins
- Brushes
- Roller bearings
- Pump shafts and rings
- Thread inserts
- Fasteners
| Approximate Chemical Composition | |
| Cr | 16 - 18% |
| Ni | 8 - 9% |
| Mn | 7 - 9% |
| Si | 3.5 - 4.5% |
| N | 0.08 - 0.18% |
| Fe | BAL |
| Properties | ||
| DENSITY | 7.6 g/cm3 | 0.28 lb/in3 |
| MELTING POINT | 1375°C | 2500°F |
| COEFFICIENT OF EXPANSION | 15.8 µm/m °C (21 - 93°C) |
8.810 x 10-6 in/in
°F (70 - 200°F) |
| MODULUS OF RIGIDITY | 69 kN/m2 | 10008 ksi |
| MODULUS OF ELASTICITY | 181 kN/m2 | 26200 ksi |
| CONDITION OF SUPPLY | HEAT TREATMENT (AFTER FORMING) |
| Solution Annealed | Stress relieve at 250°C (480°F) for 1 hour and air cool. |
| Spring Temper |
| CONDITION | APPROX TENSILE STRENGTH | APPROX SERVICE TEMPERATURE | ||
| Solution Annealed | 600 - 750 N/mm2 | 87 - 109 ksi | -200 to +300°C | -330 to +570°F |
| Spring Temper | 1300 - 1900 N/mm2 | 189 - 276 ksi | ||
Alternatively call us on +44 (0)1384 566775
or email us at
Print this page...
Request a Brochure...
