Alloy Wire UK

United Kingdom Contact Information

Narrowboat Way, Hurst Business Park, Brierley Hill,
West Midlands, DY5 1UF UK

Tel: +44(0) 1384 262022
Fax: +44(0) 1384 263022
E-Mail: sales@alloywire.com

Tolerances

Tolerances

Alloy Wire inspect all phases of production and our test equipment can verify the tolerance of the wire/tape/ribbon/section/profile, surface quality, roundness, strength properties and the stress required to breaking point.

Please see our standard tolerances below.

We can offer tighter tolerances, please let us know what tolerance you require.

Wire Diameter Tolerances
mm inch
wire diameter up to but excluding tolerance wire diameter up to but excluding tolerance
0.0254 0.203 ± 0.0051 .001 .008 ± .0002
0.203 0.376 ± 0.0076 .008 .015 ± .0003
0.376 0.813 ± 0.0100 .015 .032 ± .0004
0.813 1.220 ± 0.0127 .032 .048 ± .0005
1.220 2.030 ± 0.0152 .048 .080 ± .0006
2.030 3.250 ± 0.0203 .080 .128 ± .0008
3.250 4.470 ± 0.0254 .128 .176 ± .0010
4.470 5.890 ± 0.0381 .176 .232 ± .0015
5.890 8.000 ± 0.0510 .232 .315 ± .0020
8.000 10.00 ± 0.0635 .315 .395 ± .0025
10.00  21.00 ± 0.0762 .395  .827 ± .0030
Wire Ovality Tolerances
mm inch
wire diameter up to but excluding tolerance wire diameter up to but excluding tolerance
0.0254 0.0508 ± 0.0051 .001 .002 ± .0002
0.0508 1.02 ± 0.0076 .002 .040 ± .0003
1.02 2.03 ± 0.0100 .040 .080 ± .0004
2.03 4.47 ± 0.0127 .080 .176 ± .0005
4.47 8.00 ± 0.0152 .176 .315 ± .0006
8.00  21.00 ± 0.0203 .315  .827 ± .0008
Flat Wire Tolerances
mm inch
dimensions tolerance dimensions tolerance
Width ± 5% Width ± 5%
Thickness Thickness
0.20 and below ± 0.0100 .008 and below ± .0004
over 0.20 ± 5% over .008 ± 5%
Shaped Profile Tolerances
mm inch
section size up to but excluding tolerance section size up to but excluding tolerance
up to 2.0 ± 0.04 up to .787 ± .0016
2.0 4.0 ± 0.07 .0787 .157 ± .0027
4.0 and above ± 0.15 .157 and above ± .0059
Straight Length Tolerances
mm inch
diameter length tolerance diameter length tolerance
up to 2.5 up to 1000 ± 1.00 up to .098 up to 40 ± .040
up to 2.5 1000 – 2000 ± 2.00 up to .098 40 – 80 ± .080
up to 2.5 2000 – 3000 ± 2.50 up to .098 80 – 120 ± .098
2.5 – 5.0 up to 1000 ± 2.00 .098 – .197 up to 40 ± .080
2.5 – 5.0 1000 – 2000 ± 2.50 .098 – .197 40 – 80 ± .098
2.5 – 5.0 2000 – 3000 ± 3.00 .098 – .197 80 – 120 ± .120
5.0 – 12.0 up to 1000 ± 4.00 .197 – .472 up to 40 ± .160
5.0 – 12.0 1000 – 2000 ± 5.00 .197 – .472 40 – 80 ± .200
5.0 – 12.0 2000 – 3000 ± 6.00 .197 – .472 80 – 120 ± .240
Electrical Resistance Tolerances
mm inch
wire diameter up to but excluding tolerance wire diameter up to but excluding tolerance
0.0254 0.0508 ± 12% .001 .002 ± 12%
0.0508 0.076 ± 10% .002 .003 ± 10%
0.076 0.15 ± 7% .003 .006 ± 7%
0.15 ± 5% .006 ± 5%
Flat wire ± 5% Flat wire ± 5%

Alloy Wire
Contact us for more information

Call Alloy Wire

+44(0) 1384 262022